overview
2L Plug Valves are engineered for high-cycle, low-emissions service, these non-lubricated plug valves come with an extra measure of positive stem sealing reliability design feature to suit a broad variety of applications, reliably addressing the vast majority of requirements.
It can be used with confidence in applications where tight shutoff and emissions containment are unconditional requirements to ensure safety.
Special Features
- The design complies with API 6D, API 599
- Blowout-proof Shaft
- Tight sealing and low operating torque;
Cavity free
- Easy in-line adjustability
- Actuator mounting pads to ISO 5211
Design Standards
- ASME B16.34, API 6D and API 599
End Flanges:
Face to Face
Testing Standard
End Connections
- Raised Face Flange (ASME B16.5, EN 1092-1)
- Ring Type Joint (ASME B16.5)
Sizes Range
- DN 25 to DN 250 (1/4" to 10")
Pressure rating
- PN 10, PN 16, PN 25, Class 150 & Class 300
Operations
- Manual: Bare-shaft, Lever & Gearbox
- Automation: Electric, Pneumatic, and Hydraulic Actuators
Shutoff Rating
- Zero Leakage for Soft Seated
Material Type Specification:
|
Type of Service: |
Valve Shell Material: |
Pressure Controlling Parts &
Stem: |
General Service |
Carbon or Low-Alloy Steel |
Carbon or Low-Alloy Steel |
General Service |
Carbon or Low-Alloy Steel |
Stainless Stee |
General Service |
Stainless Steel |
Stainless Stee |
Sour Service |
Carbon or Low-Alloy Steel |
Carbon or Low-Alloy Steel |
Sour Service |
Carbon or Low-Alloy Steel |
Stainless Steel |
Sour Service |
Stainless Steel |
Stainless Steel |
Sour Service |
CRA ( Corrosion Resistant Alloy) |
CRA ( Corrosion Resistant Alloy) |
Sour Service: as per NACE MR0175 / ISO 15156 and NACE MR0103 / ISO17945, for full details, contact 2L Engineers;
Material Specification details are only indicative, for full details, contact 2L Engineers.